Where To Place Carbon Monoxide Detectors In Your Manhattan Home
Property owners must safeguard against numerous risks like burglary, fire, and flooding. But what about a risk that can’t be detected by human senses? Carbon monoxide creates an uncommon challenge as you may never realize it’s there. Nevertheless, implementing CO detectors can simply safeguard yourself and your household. Explore more about this dangerous gas and where to place carbon monoxide detectors in your Manhattan property.
What Is Carbon Monoxide?
Known as the silent killer because of its lack of color, taste, or odor, carbon monoxide is a common gas caused by an incomplete combustion of fuels. Any appliance that uses fuels like an oven or furnace may generate carbon monoxide. Although you normally won’t have problems, complications can arise when an appliance is not regularly inspected or properly vented. These missteps can cause a build-up of the potentially lethal gas in your home. Generators and heating appliances are the most consistent causes for CO poisoning.
When subjected to low amounts of CO, you may suffer from headaches, dizziness, fatigue nausea, or vomiting. Prolonged exposure to higher amounts can cause cardiopulmonary arrest, and even death.
Tips For Where To Place Manhattan Carbon Monoxide Detectors
If your home doesn’t have a carbon monoxide detector, purchase one today. Ideally, you ought to use one on each floor, and that includes basements. Browse these tips on where to place carbon monoxide detectors in Manhattan:
- Put them on every floor, specifically in areas where you have fuel-burning appliances, including fireplaces, furnaces, water heaters, and gas dryers.
- You ought to always install one no more than 10 feet away from bedroom areas. If you only have one carbon monoxide detector, this is where it should go.
- Position them about 10 to 20 feet away from potential CO producing appliances.
- Do not affix them directly above or beside fuel-burning appliances, as a small degree of carbon monoxide may be released when they start and set off a false alarm.
- Fasten them to walls approximately five feet from the floor so they can sample air where occupants are breathing it.
- Avoid installing them in dead-air areas and near doors or windows.
- Place one in areas above attached garages.
Check your CO detectors often and maintain them in accordance with manufacturer guidelines. You will usually need to replace them within five or six years. You should also ensure any fuel-utilizing appliances are in in proper working order and have adequate ventilation.